Buy GS26LT Part of Caro Inc with NSN 3416-00-165-4201
Part number GS26LT is available for immediate shipping. The NSN for part number is 3416001654201. This part is manufactured by Caro Inc. It is described as Lathe Engine. Would you like to request a quote for part number GS26LT? Please fill out the form.
The form includes various important fields such as your contact details, Need Parts By, and Quantity. Please make sure to fill out all these fields accordingly before clicking to submit the form. Our experts will review your answers for Need Parts By and Quantity to calculate your quote.
Upload RFQ Sheet
If you have more than one item, upload your spreadsheet here
Characteristics Data of NSN 3416-00-165-4201, 3416001654201
| MRC | Criteria | Characteristic |
|---|---|---|
| ACDC | Current Type | AC |
| APGF | Design Type | SCREW |
| APHE | Operation Method | MANUAL |
| AWHA | Bed Type | PERMANENT GAP |
| AWLX | Electric Motor Quantity | 1 |
| AAXX | Mounting Type | BENCH |
| ASHK | Electric Motor Horsepower Rating | 0.500 |
| ADQR | Center To Center Distance | 34.000 INCHES NOMINAL |
| ELEC | Voltage In Volts | 230.0 |
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | +52.0/+285.0 |
| BTTD | Rated Swing | 10.000 INCHES NOMINAL |
| AKSL | Purpose For Which Designed | GENERAL |
| BTTF | Actual Swing Over Bed | 9.938 INCHES NOMINAL |
| BTTG | Swing Over Cross Slide | 6.250 INCHES NOMINAL |
| BTWB | Thread Change Quantity | 48 |
| FREQ | Frequency In Hertz | 60.0 |
| BTWL | Headstock Drive Type | STEP CONE PULLEY, BACK GEARED" |
| BTWM | Headstock Center Taper Size Designator | 2 MORSE |
| BTYP | Hole Diameter Through Spindle | 0.844 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| AKYD | Accessory Components And Quantity | LATHE: QTY: 1 HP MOTOR WIRED TO CUSTOMERS'S VOLTAGE REQMTS; ELECTRICS INCLUDE AN APPROPRIATE SWITCHING DEVICE. QTY 1 - BENCH CABINET, QTY 1-THREAD DIIAL INDICATOR, QTY 1- PLAIN SADDLE STOP, QTY 1- LARGE FACE PLATE, QTY 1-STEADDY REST, QTY 2-DEAD CENTERS 2MT, QTY 1 -THREADING STOP, QTY 1-DRIVE PLATE 5- -7/8"" DIAMETER, QTY 1-4-WAY MANUAL TURRET TOOL POST, QTY 1-MICROMETER CARRIAGE STOP, QTY 1-TELESCOPIC TAPER ATTACHMENT, QTY 1-SPINDLE SLEEVE FOR 2MT CENTER, QTY 1-SET OF METRIC TRANSPOSING GEARS, QTY 1-TOOL KIT, QTY 1- INSTRUCTION/MAINTENANCE MANUAL" |
| BTYR | Carriage Longitudinal Feed Operation Method | POWER |
| BTYS | Carriage Cross Feed Operation Method | POWER |
| BTYT | Carriage Feed Change Quantity | 48 |
| BTYW | Gear Change Type | QUICK |
| BTZR | Thread Quantity Range | +4.0/+224.0 PER INCH |
Recently Viewed Parts
Sought-After NSN Components List
Leading NSN Part Manufacturers
