Buy 110-2076 Part of Enco Mfg Co with NSN 3416-01-390-4591
MPN: 110-2076
Alternate P/N: 1102076
Manufacturer: Enco Mfg Co
NSN: 3416-01-390-4591
Item Name: Lathe Engine
CAGE Code: 0GV04
Part number 110-2076 is available for immediate shipping. The NSN for part number is 3416013904591. This part is manufactured by Enco Mfg Co. It is described as Lathe Engine. Would you like to request a quote for part number 110-2076? Please fill out the form.
The form includes various important fields such as your contact details, Need Parts By, and Quantity. Please make sure to fill out all these fields accordingly before clicking to submit the form. Our experts will review your answers for Need Parts By and Quantity to calculate your quote.
Upload RFQ Sheet
If you have more than one item, upload your spreadsheet here
Characteristics Data of NSN 3416-01-390-4591, 3416013904591
| MRC | Criteria | Characteristic |
|---|---|---|
| BTSZ | SPINDLE SPEED QUANTITY | 18 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 60.0 TO 1550.0 |
| BTTD | RATED SWING | 12.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 12.000 INCHES NOMINAL |
| BTTG | SWING OVER CROSS SLIDE | 7.500 INCHES NOMINAL |
| BTWB | THREAD CHANGE QUANTITY | 40 |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 5 MORSE |
| BTYN | HOLLOW SPINDLE HOLE SIZE | 1.500 INCHES NOMINAL |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 1.500 |
| ELEC | VOLTAGE IN VOLTS | 110.0 AND 220.0 |
| ACDC | CURRENT TYPE | AC |
| FAAZ | PHASE | SINGLE |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 CABINET STAND; 1 6 IN. 3-JAW CHUCK; 1 8 IN. 4-CHUCK; 1 4-POSITION TOOLPOST; 2 CENTERS; 1 CHIP PAN; 1 SET OF CHANGE GEARS; 1 FACEPLATE; 1 STEADY REST; 1 FOLLOWREST; 1 TOOL KIT |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYW | GEAR CHANGE TYPE | QUICK |
| AWHA | BED TYPE | PERMANENT GAP |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| FEAT | SPECIAL FEATURES | ELECTRO-MAGNETIC STARTER SWITCH; D1-4 SPINDLE WITH 1 9/16 IN. BORE; REINFORCED CROSS RIBS; HARDENED AND GROUND BED; HEADSTOCK WITH TAPERED ROLLER BEARINGS; SWING IN GAP 17 IN.; CROSS SLIDE TRAVEL 5 1/2 IN.; COMPOUND REST TRAVEL 3 1/4 IN.; TAILSTOCK SPINDLE TRAVEL 3 3/4 IN.; TAILSTOCK TAPER 3 MORSE TAPER; 29 METRIC THREAD CHANGES 0.2MILLIMETERS TO 4.5 MILLIMETERS |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AAXX | MOUNTING TYPE | BENCH |
| APGF | DESIGN TYPE | SCREW |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| ADQR | CENTER TO CENTER DISTANCE | 36.000 INCHES NOMINAL |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.500 INCHES NOMINAL |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTZR | THREAD QUANTITY RANGE | 4.0 TO 112.0 PER INCH |
Sought-After NSN Components List
Leading NSN Part Manufacturers
